Products

Frits is an industrial product that is widely used on manufacturing of almost all types of ceramic tiles and glass articles. it is one of the key element for tiles manufacturing as it creates glass coating over the surface of tiles to make it durable and scratch resistant. It is produced from the raw materials like Silica, Feldspar, Borax and Calcium Carbonate, most of this are widely available mineral powders. These raw materials are blended and particular portion and melted in continuous heat process to form a glass from them. This glass form of frit into their melted form then quenched in water to form a raw frit granules. Afterwards this quenched granules supplied to tiles manufacturer into different formats of powders, un-ground or sized formats.

With years of experience we have for wall tiles and floor tiles manufacturing, we understand the need of quality frit and what makes the good production process of it. Our manufacturing process of frit and glaze are based on innovative formulation and consistency to provide you even quality at any point of time. This makes glazing even easier for tiles manufacturer by specifying the raw material parameters just once.

Today’s market for tiles manufacturing has became very vibrant and there are different types of frit requirements to match the product precision. Whether it be a glassy transparent, opaque or matte frit for floor and wall tiles, we provide solution for each of them with quality product. Different types of our product ranging for different finished wall or floor tiles are mentioned below.

A. For single and double fast firing wall tiles

  • Transparent glossy and matte
  • Opaque glossy and matte
  • High and low thermal frit for Engobe

B. For single firing floor tiles

  • Transparent glossy and matte
  • Opaque matte
  • High and low thermal Engobe frit

C. For GVT/PGVT

  • Engobe compost
  • Opaque base glaze compost
  • Transparent matte compost for protection

Our wide ranges of frit are available for each section of tiles manufacturing to suits the condition of temperature, kiln cycle and TE different of the tiles body.

Quality and consistent quality is the two main pillar of our product. And to maintain that we optimize best quality of raw material with state of the art manufacturing facility. Also we operate in-house quality control through latest instruments for Dilatometer, XRF Device, Flame Photometer, Fast Firing Roller Kiln, Pilot continuous furnace for developing new Frit and Fast Grinding Mill. We know what it makes to be a great frit and glaze manufacturer and we work hard to achieve that. We follow consistent product quality parameters so you can rest assure.

 

 

 

PRODUCT TYPE PRODUCT CODE MATURING TEMPERATURE
OPAQUE GLOSSY SGO – 5013 1060 TO 1150 (DOUBLE FIRING)
  SGO – 31003 1060 TO 1150 (DOUBLE FIRING)
  SGO – 1008 1060 TO 1150 (DOUBLE FIRING)
  SGO – 1009 1060 TO 1150 (DOUBLE FIRING)
  SGO – 4004 1060 TO 1150 (DOUBLE FIRING)
  SGO – 1007 1060 TO 1150 (DOUBLE FIRING)
  SGO – 8009 1060 TO 1150 (DOUBLE FIRING)
  SGO – 2008 1060 TO 1150 (DOUBLE FIRING)
  SGO M – 7001 1100 TO 1130 (MONOPOROSA)
  SGO M – 7013 1100 TO 1130 (MONOPOROSA)
  SGO M – 7445 1100 TO 1130 (MONOPOROSA)
  SGO M – 7556 1100 TO 1130 (MONOPOROSA)
     
TRANSPARENT GLOSSY SFT – 600 1060 TO 1150 (DOUBLE FIRING)
  SGT – 402 1060 TO 1150 (DOUBLE FIRING)
  SGT – 503 1060 TO 1150 (DOUBLE FIRING)
  SGFT – 26 1150 TO 1180 (FLOOR)
  SGFT – 02 1150 TO 1180 (FLOOR)
  SGTM – 204 1100 TO 1130 (MONOPOROSA)
     
MATTE SGM – 2 1060 TO 1180
     
COMPOSTO (ENGOBE & GLAZE) SGPE – 01 1200 (GVT/PGVT)
  SGPB – 024 1200 (GVT/PGVT)
  SGPT – 042 1200 (GVT/PGVT)
     
ENGOBE FRIT SGE – A  
  SGE – G  
  SGE – 10  
  SGE – 272